Adjust White Balance Manually
Manual white balance lets you configure the digital still camera for a particular light source and other conditions. Note that you must perform manual white balance under the same conditions you will be shooting under. You must also have a white piece of paper or other similar object on hand in order to perform this function.
1.Press the MODE button to access in [ 
(CAMERA)] mode with
▲,▼,t, or u, then press the OK button.
2.Press 
, then toggle u to select the [AE/AWB] menu.
3.Use ▼ and u to select [MANUAL WB], then press the OK button.
4.Point the camera at an enclosed gray card for which you can set the white balance.
This starts the white balance adjustment procedure.
5.Use ▲ or ▼ to select [EXECUTE], then press the OK button to confirm.
The procedure of manual white balance is complete.
If you with to cancel [MANUAL WB] setting, press ▲ or ▼ to select [CANCEL].
6.To exit from the menu, press the 
button.
7.Press the shutter button to shoot.
PICTURE 
FUNCTION AE/AWB
WB |
| Manual |
| ISO | WB |
MANUAL WB | CANCEL |
SELECT PAGE: | EXIT: |
SELECT ITEM: | ENTRY: |
MANUAL WB
EXECUTE
CANCEL
BACK : 
SET : 
For underwater adjustment of white balance, point the camera at the open blue water or a white slate and press execute. Experiment with this feature to find the best white balance.
