Listening to Radio
Remote Control
1 Press the TUNER button to select the FM band.
2 Tune in to the desired station.
Automatic Tuning 1 : When the 
button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the 
, 
button to automatically search for active broadcasting stations.
Manual Tuning : Briefly press the 
, 
button to increase or decrease the frequency incrementally.
Main Unit
1 Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( 
) button to select <PRESET> and then press
the 
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( 
) button to select <MANUAL> and then press and
hold the 
button to automatically search the band.
Manual Tuning : Press the STOP ( 
) button to select <MANUAL> and then briefly press
the 
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear,
ENG
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 Press the TUNER button to select the FM band. 2 Press the 
, 
button to select <89.10>.
3 Press the TUNER MEMORY button.
<PRGM> flashes in the display.
4 Press the 
button to select preset number.
You can select between 1 and 15 presets.
5 Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before <PRGM> disappears from the display.
<PRGM> disappears from the display and the station is stored in memory.
6 To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the 
button on the remote con- trol to select a channel.
• This unit does not receive AM broadcasts.
MISCELLANEOUS
54 | 55 |
