Before Calling for Service | Samsung HTDB1750RH/EDC, HTDB1850RH/EDC

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom

Check/Remedy

	Disc tray does not open.	• Is the power cord plugged securely into the outlet?
		• Turn off the power and then turn it back on.

	Playback does not start.	• Check the region number of the DVD.
	Playback does not start.	DVD discs purchased from abroad may not be playable.
		• CD-ROMs and DVD-ROMs cannot be played on this DVD
		player.
		• Make sure that the rating level is correct.

	Playback does not start	• Are you using a deformed disc or a disc with scratches on
	immediately when the	• Are you using a deformed disc or a disc with scratches on
	immediately when the	the surface?
	Play/Pause button is	• Wipe the disc clean.
	pressed.
	Sound is not produced.	• No sound is heard during fast playback, slow playback, and step
	Sound is not produced.	motion playback.
		• Are the speakers connected properly? Is the speaker setup
		correctly customized?
		• Is the disc severely damaged?

	Sound can be heard only	• When listening to a CD or radio, sound is output to the front
		speakers (L/R) only. Select "PRO LOGIC II" by pressing
		speakers (L/R) only. Select "PRO LOGIC II" by pressing
	from a few speakers and	(Dolby Pro Logic II) on the remote control to use all six speakers.
	not all six.	• Make sure that the DVD disc is 5.1-CH compatible.
	not all six.	• If you set C, SL, and SR to NONE in the speaker mode in the
		audio setup of the setup screen, no sound is heard from the
		center speaker and the front left and right speakers. Set C, SL,
		and SR to SMALL.

	Picture does not appear, sound	• Was the DVD player suddenly moved from a cold place to a warm
	is not produced, or the disc	one? When condensation forms inside the player, remove the disc
	is not produced, or the disc	and let the player stand for 1 or 2 hours with the power on. (You
	tray opens 2 to 5 seconds later.
	tray opens 2 to 5 seconds later.	can use the player again after condensation disappears.)

	Dolby Digital 5.1 CH	• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
	Surround Sound is not	CH Surround Sound is produced only if the disc is recorded with
	Surround Sound is not	5.1 channel sound.
	produced.	• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
		the information display?

63

Image 64

Samsung HTDB1750RH/EDC manual Before Calling for Service, Picture does not appear, sound, Tray opens 2 to 5 seconds later

Contents

Digital Home Cinema System Safety Warnings Class 1 Laser Product Precautions Preparation Features Multi-Disc Playback & AM/FM Tuner Contents Copy Protection Disc SizeMark Logo Max. Playing Time Disc Recording Format Description Video Output Connector Channel Speaker Remote Control Replace the battery cover Insert Remote Batteries Connecting the Speakers Selecting the Listening Position Connect the connecting jacks to the back of the DVD player Back of the Speakers Please observe the following cautions for your safety Connect the FM antenna supplied to the FM 75Ω Connecting the Video to TV Connecting External Components Connecting an External Digital Component Connecting an External Analog Component Press AUX on the remote control to select AUX 1 or AUX Press the Mode Button so that Press TV/VIDEO button to select Video modeDVD Receiver indicator on the remote control flashes Selecting the Video Format Press OPEN/CLOSE button to open the disc tray Load a discs Disc PlaybackTo stop playback Press Stop during playback Displaying Disc Information Press Info button Checking the Remaining Time Press the Remain button Press and hold Fast/Slow PlaybackPress Slow button Skipping Scenes/Songs Briefly press Repeat Playback Press Repeat buttonPress Info button twice Press Enter button Press Enter Press Info button twiceA-B Repeat function will not work on an MP3 or Jpeg disc Angle Function Press Cursor Zoom Function Press ZoomButton Press EZ View button 1Press Info button twice Press Info button Press CursorTwice Subtitle display 1Press Info button Press Cursor , buttonsTime display Chapter display Using Disc Menu Press Cursor Buttons to Press EnterSelect the desired PBC Playback Control Function Using the Title Menu Press Menu button to exit the setup screenPress Menu Button to move to Setting the Language ‘Setup’ and thenPress Enter button Button to move to Press Enter Press Cursor Press Enter button Press Cursor 2 button to move to ‘Setup’ and then Setting TV Screen typePress Cursor 3 button to move to ‘TV Letterbox Adjusting the TV Aspect Ratio Screen Size43 Pan&Scan Setting Parental Controls Rating Level Press Cursor , button Enter the passwordPress Cursor 3 button to move to Setting the Password Press Cursor Button to move to Press Menu button Enter the password Button Enter button Setting the Wallpaper Jpeg DVD VCD 1PLAY/PAUSE button when the image you like comes upDuring playback, press Press Cursor 6 button to move to ‘USER’ and then Button to open and then ‘Setup’ and thenPress Enter button Setting the Speaker Mode SpeakerPress Enter button Press Cursor Speaker and then press Enter button Setting the Test Tone ‘Audio’ and thenPress Test Tone button Press Cursor button Press Cursor button Setting the Delay TimePress Menu button to move to ‘Audio’ and then press Enter 3to move to ‘DELAY TIME’ and then press Enter button Press Cursor , 5 totime.set the DelaySetting Center Speaker Setting Rear Surround Speakers You can adjust the balance and level for each speaker Setting the Audio QualityEnter button Press Cursor button Method 2 When manually adjusting with the Sound Edit button Press Sound Setting the DRC Dynamic Range Compression To adjust the ‘DRC’.Press Cursor ‘DRC’ and then press Enter button To Turn On or Off Sound Logo Press and hold ASC buttonBriefly press ASC button Press and hold ASC button twice Adjust the volume control on the main Unit as follows When the message Remove MICPlug the auto sound calibration Press ASC button Live Surround Mode Function Live Surround ModePress SUPER5.1 Virtual Headphone Function Plug Press PL II Mode button Dolby Pro Logic II ModeYou can select the desired Dolby Pro Logic II audio mode Press PL II Mode Button to select ‘MUSIC’ modeDolby Pro Logic II Effect Press PL II Effect button Remote Control Unit Press Tuner Listening to RadioBand button Main Unit Presetting Stations What information can RDS signals provide? Using the RDS Radio Data System to receive FM stationsAbout RDS broadcasting PTY Program Type indication and PTY-SEARCH function PTY Search is only applicable to preset stationsBefore you start, remember To confirm the sleep timer setting, press Sleep button Convenient FunctionsPress Sleep button OFF appears on the display Press Dimmer button Press Mute button Operating the TV with the Remote Control While holding down POWER, enter the code TV Brand Code List Brand Code Picture does not appear, sound Before Calling for ServiceTray opens 2 to 5 seconds later Check/Remedy Using the Reset function will erase all stored settingsMain unit is not working Disc Storage Handling discsHandling and Storing Discs 1ch speaker system SpecificationsSubwoofer speaker Weights 1ch speaker system296 x 390 x 360 mm 2Kg Be chosen from the menu displayed on the TV monitor DVD player, the player cannot play the discSubtitle languages Movies, these movies are numbered as Title 1, Title 2, etc REV02 AH68-01286B