Connecting your System to the Power Supply
Before Using the DVD Player
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions carefully before use.
B
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
1.Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.
2.Press the On/Standby button to switch your DVD Player system on.
|
|
| AV OUT | VIDEO | |
|
|
|
| Y/C |
|
| SPEAKERS |
| SPEAKERS |
|
|
|
|
|
|
| ANTENNA |
WOOFER | CENTER | COMP. |
|
AUX1ININ | AUX2 IN | AM |
VIDEO OUT
LL
RR
6 | 3 | 6 | 6 |
| IMPEDENCE |
| IMPEDENCE |
| 1 | 2 | 3 | GB |
|
|
|
| |
| Turn on the power | Select a video mode by | Press the DVD button |
|
|
| |||
Prepe- | to your DVD player | pressing the TV/VIDEO | to select the DVD input |
|
rations | and TV. | button. | function. |
|
before | TV | TV/VIDEO | DVD |
|
use |
|
| ||
|
|
|
|
• The “WAIT” message that appears on the display for about seven to eight seconds when turning on the power or selecting a DVD function indicates a stabilization period for optimizing the condition of your DVD player. While the message is being displayed, other buttons remain inactive.
Listening on headphones
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
•No sound is produced from the speakers.
•To prevent hearing damage, do not raise the volume level excessively when using headphones.
Volume
V I D E O
Function
Phones |
HEADPHONE jack
•When the power is not turned on, press down the Stop ( 
) button on the main unit for over 5 seconds.
The product will be initialized to its optimum state.
•Certain operational features such as the Speaker mode, Test tone, Volume, etc. will not be displayed on the TV screen.
•If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 30.
TV System
TV System Selection | Zoom |
|
Press the TV System button while in stop mode.
•Each time the TV System button is pressed, “NTSC, PAL” are selected in this order.
Different countries use different types of TV broadcast systems, video, audio and channel systems.
Example : The player cannot playback
13 | 14 |
