Connecting the FM and AM(MW/LW) Antennas
1 2 3
AUX Connections
If AM reception is poor, connect an outdoor AM antenna(not supplied).
B
If FM reception is poor, connect
outdoor FM antenna (not supplied).
ANTENNA
AM Loop Antenna (supplied)
GB
TV
| To view pictures from the |
| external input (AUX), first |
| connect the VIDEO IN |
VIDEO IN | jack (VIDEO) and then |
| |
| connect the VIDEO OUT |
| jack. |
AV OUT
SPEAKERS
AUX1 IN AUX2 IN
Y/C | VIDEO |
COMP. 
VIDEO OUT
ANTENNA
AM
FM Antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
6
COAXIAL
FM 75
IMPEDANCE
Audio Cable (Red/White)
|
|
| AV OUT | VIDEO | |
|
|
|
| Y/C |
|
| SPEAKERS |
| SPEAKERS |
|
|
|
|
|
|
| ANTENNA |
WOOFER | CENTER | COMP. |
|
AUX1ININ | AUX2 IN | AM |
VIDEO OUT
LL
RR
6 | 3 | 6 | 6 |
| IMPEDENCE |
| IMPEDENCE |
Cooling fan (See “About Cooling Fan” below.)
If the external analog
component has only one output jack, you may
connect either L or R.
External Analog
Components
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
•If reception is poor, connect an outdoor antenna. Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
AM(MW/LW) antenna connection
1.Connect the AM loop antenna supplied
to the AM and 
terminals.
2.If reception is poor, connect an outdoor single
R L
Connect to external equipment with analog output.
•Always connect the video and audio connection cables to the equivalent colored jack.
Example: Video, TV, LDP, etc.
| Making Analog Input Selection |
Remote Control | Press the AUX button and select AUX 1 IN, AUX 2 IN. |
(About the cooling fan)
A cooling fan is mounted on the rear panel of the center unit to prevent abnormal temperature inside the center unit, thus assuring normal operation. The cooling fan automatically starts rotating to supply external cool air to the inside of the center unit when the internal temperature exceeds the specified limit.
For safety, observe the following carefully.
•Make sure there is good ventilation around the center unit. Poor ventilation could overheat and damage the canter unit.
•DO NOT block the cooling fan and the ventilation openings or holes. (If they are blocked by a newspaper or cloth, etc., the heat may not be able to escape.)
Main Unit | Press the Function button and select AUX 1 IN, AUX 2 IN. |
11 | 12 |
