HT-F4530
(L) (R)
FRONTSTAND
SCREW (5x20): 8EA
SPEAKER CABLE | CENTER |
(L)(R)
STAND BASE | SURROUND | SUBWOOFER |
03 Connections
Installing the Speakers on the Tallboy Stand
* HT-F4530 only - Front Speakers
1 Stand Base | 2 |
1. Turn the Stand Base
2. Use the driver to combine the screws on the 3 marked holes.
Stand 
3.Straighten a supplied speaker wire to the gravity direction and
put in the hole on the center of Stand Base. | 3 | 4 |
4. Connect the upper Speaker to the assembled Stand. |
| Speaker |
Stand 
5.Insert a screw clockwise into the hole on the rear of the speaker
using a screwdriver. | 5 | 6 |
And then connect a speaker cable. | ||
6. This is the appearance after the speaker is installed. |
|
|
Follow this steps to install other speaker. |
|
|
Connecting The Speakers
1.Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom of each speaker.
2.To attach speaker wire to each speaker:
a.Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.
b.Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.
3.Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks.
Black | Red |
English 13
