Samsung HTH5500 user manual Speaker Cable Connections

is too close to the product, sound from the speakers may be disrupted because of interference.

Connections

Speaker Cable Connections

1.Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom or back of each speaker.

2.Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks.

Center Speaker

Subwoofer

Surround	Surround
Speaker (L)	Speaker (R)

Wireless Receiver Module

* This product should be connected with the SWA-6000 only.

Front Speaker (L)

Front Speaker (R)

✎✎If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.

✎✎Place the wireless receiver module at the rear of the listening position. If the wireless receiver module

✎✎If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.

✎✎The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio waves cannot penetrate metal.

✎✎If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back of the wireless receiver module for 5 seconds, and then turn the product on.

10 - English