Network Setup
When you connect this product to a network, you can use network based applications and functions such as
Configuring Your Network Connection
To begin configuring your network connection, follow these steps:
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Go to the instructions for Wired networks starting below or the instructions for Wireless networks on the bottom right of this page.
Wired Network
ĞĞWired – Automatic
After following Steps 1 to 3 above:
1.In the Network Settings screen, change Network Type to Wired. Then, select Connect and press the v button. The product detects the wired connection, verifies the network connection, and then connects to the network.
2.When it is done, highlight OK, and then press v button.
ĞĞWired - Manual
If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 above:
1.In the Network Settings screen, change Network Type to Wired. Then, select Connect and press the v button.
The product searches for a network, and then displays the connection failed message.
✎✎If it is possible to connect the home theater to your network wirelessly, select Change Network at this point, change the Network Type to Wireless, and then go to the instructions for wireless networks on the bottom right of this page.
Network Settings
Wired network connection failed.
MAC Address | XX:XX:XX:XX:XX:XX | |||
IP Address | 0. | 0. | 0. | 0 |
Subnet Mask | 0. | 0. | 0. | 0 |
Gateway | 0. | 0. | 0. | 0 |
DNS Server | 0. | 0. | 0. | 0 |
IP auto setting failed. Try the following to set up IP automatically, or set up the IP manually by selecting 'IP Settings'.
-Ensure that DHCP server is enabled on the wireless network, and then unplug and
-Contact your Internet Service Provider for more information.
Change Network | IP Settings | Retry | Close |
|
|
|
|
| a Previous | d Skip < Move | " Select |
2.Use the ◀▶ buttons to select IP Settings, and then press the v button. The IP Settings screen appears.
3.Select the IP Setting field, and then set it to Enter manually.
4.Select a parameter to enter (IP Address, for example), and then press v. Use the number keypad on your remote control to enter the numbers for the parameter. You can also enter numbers using the ▲▼ buttons. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter.
When done with one parameter, press the v button.
5.Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 4.
6.Repeat Steps 4 and 5 until you have filled in all parameters.
✎✎You can get the network parameter values from your Internet provider.
7.When finished entering all the parameter
values, select Return ('), and then press the v button. The home theater verifies the network connection and then connects to the network.
Wireless Network
You can set up a wireless network connection in three ways:
Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.
Settings
19 - English
