Palm PMG0501000P manual Use Ieee 802.1x network access, Disconnecting from a network

Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S

8

information. The availability of these options varies based on your Authentication and Data Encryption settings.

4Enter the following settings and press Finish (right softkey):

Use IEEE 802.1x network access

control: Lets you set these parameters if required by the network.

EAP type: Specifies the Extensible Authentication Protocol type.

5Press OK .

Disconnecting from a network

To disconnect from a Wi-Fi network, do one of the following:

•To save any settings you entered, so that your smartphone automatically connects to this network the next time you are within range and the Wi-Fi feature is turned on, press and hold

Wi-Fi to turn off the Wi-Fi feature.

•To remove the network settings from memory, so that your smartphone does not automatically connect to this network the next time you are within range and the Wi-Fi feature is turned on, press Menu (right softkey) and select Remove Settings.

Customizing Wi-Fi settings

1Press Start and select Settings.

2Select the Connections tab, and then select Wi-Fi Prefs . The Main and Advanced tabs show the status of the Wi-Fi feature and display information about an active Wi-Fi connection.

C H A P T E R

C O N N E C T I N G T O A W I - F I N E T W O R K 179