Samsung HW-C770S/XEE, HW-C770S/XEN, HW-C700B/XEN, HW-C700/XEN, HW-C700/EDC manual Setting Ex/Es Mode

SETTING EX/ES MODE

When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.

1.Press the SETUP/MENU button.

• Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.

2.	Press the ENTER button to select SETUP ENTER.	Æ
3.	Press the ▲▼ buttons to select EX/ES SETUP, and then press the
	ENTER or ► button.
4.	Press the ▲▼ buttons to set the EX/ES mode you want.
		Æ
	• AUTO : If the unit receives an audio signal that it can recognize, it will
	select an optimal decoder for playback in 6.1/7.1 channels.
	If the amplifier does not recognize the audio signal, it will not play in
	6.1/7.1 channel automatically.

•ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using Dolby Digital Surround EX / DTS ES decoder.

•OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.

-To exit setup mode-

•Press the SETUP/MENU button.

SETUP OFF appears on the display and Setup Mode is exited.

M You cannot use DTS-ES without surround back speakers connected.

41

ENG

● SETUP

HW-C700-C770S-C770BS-ELS_0504.in41 41 2010-05-04 ￿￿ 11:42:08