Samsung HW-D770S/EN, HW-D700/EN manual Selecting the 3D Sound mode, Using the Subwoofer button

Selecting the 3D SOUND mode

1.Press the AUDIO EFFECT button to select 3D SOUND mode.

• Each time you press this button,			 3D SOUND will
be selected in turn.

2.Press the <, > button.

•Each time you press the <, > button, 3D SOUND ON  3D SOUND OFF will be selected in turn.

•You can also select the 3D SOUND mode by pressing the 3D SOUND button on the remote control.

✎NOTE

The 3D sound effect will not be available for Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio.

You cannot use Dolby Pro Logic llx mode for Analogue multi channel signals, LPCM multi channel signals from HDMI, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio.

Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.

The 3D sound effect will not be available for FM.

04 Operation

Using the SUBWOOFER button

You can set the subwoofer Level.

1.Press the SUBWOOFER button.

2. Press the ◄ ► buttons to select Subwoofer LEVEL under the Display with S.W. (The display disappears automatically.)

- Setting the Subwoofer Level-

•SW (Subwoofer) : -10 ~ +10dB

Listening to the Radio

You can listen to the radio by using either automatic or manual tuning.

1.Press the INPUT SELECT button on the remote control to select FM.

2.Select a frequency (radio broadcast).

•Preset tuning :

Press the #,$ buttons on the remote control to select the preset frequency.

•Manual tuning 1 (Automatic tuning):

Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a frequency.

•Manual tuning 2 :

Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease the frequency step by step.

✎NOTE

You can also use the SELECT (.,,) button on the main uint to change the radio frequency. English 51

HW-D700_D770S_ELS_0609.indd 51 2011-06-09 ￿￿ 5:38:40