Samsung HW-D700/EN, HW-D770S/EN, HW-D700/XE manual Setting the Test Tone

Setup

Setting the Test Tone

Use the test tone to check the speaker connection status or level.

1.Press the SETUP/MENU button on the remote control.

•Each time the button is pressed, the mode switches between INPUT and SETUP OFF.

2.Press the ▲▼ buttons to select SPEAKER, and then press the ENTER button.

3.Press the ▲▼ buttons to select TEST TONE, and then press the ENTER button.

4.Press the ▲▼ buttons to select the option you want, and then press the ENTER button.

•AUTO : Test signal will be automatically output as follows; F.L  CEN  S.W  F.R  S.R  SBR  SBL  S.L.

-During test tone output, press the ▲▼ buttons to adjust the speaker output level from -10 to +10 dB by 1 step.





•MANUAL : Enables you to adjust the output level of the speaker manually.

1)Press the ENTER button to select the speaker

you want.

Each time you press the ENTER button, F.L  CEN  S.W  F.R  S.R  SBR  SBL S.L will be selected in turn.

2)Press the ▲▼ buttons to set the Test Tone mode you want.

You can adjust the speaker output level from -10 to +10dB by 1 step.

The sound gets quieter at -10dB and louder at +10dB.

▲F L 0 d B

▼

SL 0dB

SBL 0dB

>MOVE

					MANUAL
					FR
C			SW
					0dB
0dB	USER		0dB		SR
					0dB
				SBR
				0dB
SELECT		' RETURN			EXIT

- Test Tone Output -
• F.L (front left) : -10 ~ +10dB	• CEN (centre) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB	• S.W (subwoofer) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB	• SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB	• SBR (surround back right) : -10 ~ +10dB

- To stop test tone -

•Press the SETUP/MENU button once.

SETUP OFF appears on the display and test tone stops.

✎NOTE

In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L  FHL  CEN  S.W  FHR  F.R  S.R  S.L.

40 English

HW-D700_D770S_ELS_0609.indd 40 2011-06-09 ￿￿ 5:38:31