![](/images/new-backgrounds/1282084/28208435x1.webp)
CONNECTIONS
●● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
●● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY LED on the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.
●● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.
●● The transmission distance of the wireless signal between the main unit and subwoofer is about 10 meters, but may vary depending on your operating environment. If a
●● If the main unit doesn't make a wireless connection, follow steps
●● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture.
●● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.
CONNECTING TO A TV
CONNECTIONS WITH TV USING HDMI (DIGITAL) CABLE
HDMI Cable
HDMI IN | HDMI OUT |
|
1.Connect an HDMI cable from the HDMI OUT
2. Press the | (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select |
the D.IN mode. |
|
●● HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
●● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
●● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.
●● Anynet+ must be turned on.
●● This function is not available if the HDMI cable does not support ARC.
18