|
| CONNECTIONS |
2. | Turn off the Soundbar. |
|
3. | Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF). | |
| EFFECT | WOOFER |
|
| |
| VOL | SOUNDB |
4. The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.
ENG
ID SET
Right Side of the Soundbar
5.When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by pressing 
button on the right side of the main unit or on the remote control.
6.When the connection is successfully established, the blue indicators on the rear of the subwoofer and surround speakers turn on without blinking.
●● If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
LED indicator lamp status on subwoofer and surround sound speakers
LED | Status | Description | Resolution |
|
| Standby (with the Soundbar main | Check the power supply to the |
Red | On | unit turned off) | Soundbar main unit |
Connection failed | Connect again | ||
|
| (refer to the instructions on manual | |
|
|
| connection in the user manual) |
| On | Successfully connected | - |
| (normal operation) | ||
|
|
| |
Blue |
| Standby (with the Soundbar main | Check the power supply to the |
Blinking | unit turned off) | Soundbar main unit | |
| Connection failed | Connect again | |
|
| (refer to the instructions on manual | |
|
|
| connection in the user manual) |
Red and blue | Blinking | Malfunction | Contact the service centre. |
21
