Samsung 340W 2.1-Kanal Curved Soundbar HW-M4500 Connecting a TV using an HDMI Cable, TV ARC, Auto Power Link, D.IN, Left, D.IN, D.IN, D.IN, TV ARC, TV ARC, (Source), (Source)

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.

1.Connect the Soundbar and a TV with a digital optical cable.

2.Press the(Source) button on the top panel or on the remote control, and then select “D.IN”.

3.Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off.

•• Auto Power Link is set to ON by default.

(To turn off this function, turn off Auto Power using the Soundbar.)

•• Depending on the connected device, Auto Power Link may not function.

•• This function is only available in the “D.IN” mode.

Connecting a TV using an HDMI Cable

Check the (ARC) at

HDMI IN port of your TV.



HDMI IN

(ARC) HDMI Cable (not supplied)

Top of the Soundbar

Bottom of the Soundbar

HDMI IN

HDMI OUT

(TV-ARC)

Check the

HDMI OUT (TV-ARC) port of the Soundbar main unit.

TV ARC

1.With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.

2.“TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.

•• If TV sound is inaudible, press the (Source) button on the remote control or on the top panel of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.

ENG - 10