1.Place the Wall Mount Guide against the wall surface.•• The Wall Mount Guide must be level.

•• If your TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.

5 cm or more

2.Align the Paper Template’s Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.

•• If you are not mounting below a TV, place the Centre Line in the centre of the installation area.

A

B

CENTER LINE

A-TYPE : 616mm

B

A

 

 

 

B-TYPE : 360mm

 

 

Centre Line

3.Push a pen tip or sharpened pencil tip through the centre of the A-TYPEimages on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

A

B

CENTER LINE

A-TYPE : 616mm

B

A

 

 

 

B-TYPE : 360mm

 

 

A

4.Using an appropriately sized drill bit, drill a hole in the wall at each marking.

•• If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large enough for the anchors or mollies you use.

5.Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.

ENG - 19