![](/images/new-backgrounds/1325530/32553019x1.webp)
3.Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off.
•• Auto Power Link is set to ON by default.
(To turn off this function, turn off Auto Power using the Soundbar.)
•• Depending on the connected device, Auto Power Link may not function.
•• This function is only available in the “D.IN” mode.
Connecting a TV using an HDMI Cable
Bottom of the Soundbar
Connect to the HDMI IN |
| ||
(ARC) port of your TV. | HDMI IN | ||
| |||
|
| ||
HDMI IN | HDMI Cable |
| |
(ARC) |
| ||
(not supplied) | HDMI OUT | ||
| |||
|
|
Connect to the HDMI OUT
TV
ARC
Right Side of the
Soundbar
1.With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure.
2.“TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
•• If TV sound is inaudible, press the(Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the cable is connected to the correct port.
•• Use the volume buttons on the TV’s remote control to change the volume of the Soundbar.
ENG - 6