Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner.
1Press the 
button under the remote control flap one or more times
as required.
Result: The outer blade is adjusted vertically.
RECOMMENDATION | When... | Adjust the blade to face... |
| Cooling | Upwards. |
|
|
|
2 If you want the blade to move up and down automatically when the air
conditioner is operating, press the 
button.
Result: The blade move up and down, around the base position set.
3To stop the blade moving up and down, press the 
button again.
Note | If you switch the air conditioner... Then the blade is... | |
| Off | Closed completely. |
| On again | Reset to the position that you |
|
| previously selected. |
|
|
|
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally.
1Open the air flow blade along the bottom of the indoor unit, by
pressing the 
button.
2 To stop the blade moving up and down, press the 
button again.
3Adjust each set of inner blades to the required position, by pushing or pulling them sideways.
