Setting the Sleep Timer
O | DE | TURBO | F |
| OF |
The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours.
Note If you wish to switch the unit off at a specific time, refer to page 15.
1If the 
indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
2 Press the 
button .
Result: ◆ | The indoor unit beeps. | |
◆ | The | indication is displayed. |
◆The air conditioner will be controlled as indicated in the illustrations below.
Cooling | The temperature is increased |
|
|
|
|
| by 1°C every hour. |
| 2°C |
|
|
| When it has been increased |
| 1°C |
|
|
| by 2°C (after two hours), the | Set |
|
|
|
| temperature is maintained for | TEMP. | 1hr | 2hr | 6hr |
| four hours. |
| Start |
| Stop |
|
| time |
| time |
Setting the Quick Timer
The Quick Timer enables you to set the air conditioner to switch off automatically after a given period of time, by pressing one single button. The unit can be switched off automatically after 30 minutes, one hour, two hours, three hours or five hours.
Note | If you wish to switch the unit off at a specific time, |
| refer to page 15. |
|
|
1If necessary, switch the air conditioner on and select the required
mode.
2 Press | OF | one or more times until the correct period is displayed: |
| F |
|
M
ODE
TURBO
OFF
Result: ◆ The TIMER indicator lights up yellow.
◆The air conditioner will switch off automatically when the
counter displayed on the remote control reaches 
.
