Samsung L100 manual Icon Mode, Motion Icon & Self-timer lamp

The detection range of

Motion Timer

Setting up the recording function using the camera buttons

„Selecting the self-timer

1.Rotate the Mode dial to select a desired RECORDING mode.

2. Press the SELF-TIMER () / RIGHT button until the desired mode indicator appears on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor.

3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

[Selecting the 10 SEC self-timer]

„Self-timer mode indicator

Icon Mode Description

Suhvvlqj#wkh#vkxwwhu#exwwrq#zloo#doorz#dq#

10SEC self-timerlqwhuydo#ri#43#vhfrqgv#ehiruh#wkh#lpdjh# lv#wdnhq1

 2SEC self-timer	Pressing the shutter button will allow an interval
	of 2 seconds before the image is taken.
	A picture will be taken after about 10 seconds
 Double self-timer	and 2 seconds later a second picture will be
	taken. When using the fl ash, the 2-second
	self-timer may be delayed for longer than 2
	seconds depending on the fl ash charging time.
 Motion Timer	The camera detects the subject’s movement 6
	seconds after pressing the Shutter button, and
	the picture is taken when the movement stops.

„ Motion Timer

Motion	Icon & Self-timer lamp
Pressing the Shutter button after	Blink (1 second interval)
setting the Motion Timer
Detecting the subject’s movement	Blink (0.25 second interval)
No movement is detected	Turn on and the image is taken after
	2 seconds

„The Motion Timer flows are as followings. (Movie mode excluded) Selecting the Motion Timer J Pressing the Shutter button J Confirming the composition (Within 6 sec.)*1 J Starting the detection (Swing your hands fully)*2 J Stopping the detection (Do not move) J Taking an image (after 2 sec.)

*1. The camera detects the subject’s movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.

*2. Move your body or hands fully.

In the following cases, the Motion Timer may not operate. ξ The focus distance is over 3m.

ξThe exposure is too bright or dark

ξ In backlight conditions.

ξ The movement is insignificant

ξThe movement is detected beyond the

center part (50%) of the sensor where the movement is recognized.

ξ If the camera doesn`t sense any movement for 30 seconds, or the camera doesn’t sense stillness after sensing movement.

33