Playback ()

ξ [Copy To Card] will not be selected without inserting a memory card. ξ If there is not enough space available in the memory card to copy saved images in the internal memory (10 MB), the [Copy To Card]

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly.

Movies and voice files cannot be printed.

command will copy only some of the images and d isplay [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.

ξ When you move the images that are stored in the internal memory

by doing [Copy To Card] to the card, the next number of file names

will be created in the card to avoid duplication of the file name.

- When the [Reset] of the [File] setup menu is set : The copied file

„Setting up the camera for connection to the printer

1.Connect the camera and printer with USB cable.

2.Select the [Printer] menu by pressing Up / Down button and press the OK button.

Select USB

Computer

Printer

Confirm

names start from after the last stored file name.

- When the [Series] of the [File] setup menu is set : The copied

file names start from after the last captured file name. After

completing [Copy To Card], the last stored image of the last

copied folder is displayed on the LCD monitor.

„Connecting the Camera to a Printer

KIf the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do steps 1 and 2 again.

65

Page 66
Image 66
Samsung L100 manual PictBridge, Movies and voice files cannot be printed, Names start from after the last stored file name