Samsung L100 Multi slide show , Selecting Images, Start the multi slide show, Are played back

Multi slide show ()

Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor.

Selecting Images

1.Press the play mode button and press the menu button.

2.Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW] () menu tab.

Start the multi slide show

The multi slide show can start only in the [Show] menu.

You can select image to view

1.Use the Up / Down buttons to select the [Image] menu and press the Right button.

2.Select a desired sub menu by pressing the Up / Down button.

[All]	: All images saved in the Memory
	are played back.

MULTI SLIDE SHOW

Show

Images All

EffectDate

IntervalSelect

Music

BackSet

1.Use the Up / Down buttons to select the [Show] menu and press the Right button.

2.Select a desired sub menu by pressing the Up / Down button.

[Play]	: The multi slide show is
	closed after one cycle.

MULTI SLIDE SHOW

Show		Play
Images		Repeat Play
Effect
Interval
Music
	Back	Set

[Date] : Images taken in a specified date are played back. Press the Right button and choose the date.

[Select] : Play only the selected images. If you press the Right button, you can select the desired images to play back. The selected image can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved

[Repeat Play] : The multi slide show is repeated until cancelled.

3.Press the OK button and the multi slide show will be started.

-To pause the multi slide shown while playing it back, press the play & pause() button again.

-Pressing the play & pause() button again will cause the multi slide show restart.

-To stop playback of the multi slide show, press the play & pause () button, and then press the MENU / OK button.

again using [New Select], the former image which had been saved as [Select1] will be saved as [Select2] automatically. You can change and cancel the images which were saved as [Select1], [Select2] and [Select3].

3.Press the OK button and the settings are saved.

4.Select [Play] or [Repeat Play] in the [Show] menu to start the multi slide show.

59