Samsung L200 manual System Requirements, About the software, For Windows For Macintosh

System Requirements

For Windows	For Macintosh
PC with processor better than
Pentium II 450MHz	Power Mac G3 or later
(Pentium 800MHz recommended)
Windows 98SE/2000/ME/XP/Vista	Mac OS 10.0 ~ 10.4
Minimum 128MB RAM	Minimum 64MB RAM
(Over 512MB recommended)
	110MB of available hard-
200MB of available hard disk space
	disk space
(Over 1GB recommend)
USB port	USB port
CD-ROM drive	CD-ROM drive
1024x768 pixels, 16bit color display
compatible monitor	MPlayer (For movie)
(24bit color display recommended)
MicroSoft DirectX 9.0C

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run.

Before connecting the camera to the PC, you should first install the camera driver.

„Camera driver : This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 10.0~10.4.

„XviD codec : This allows movie clips (MPEG-4) recorded with this camera to be played back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

78