Samsung LA52B550K1R Setting Up Anynet+, Switching between Anynet+ Devices, Setup, Anynet+ Menu

¦Setting Up Anynet+

TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+ (HDMI-CEC).

❑Setup

■Anynet+ (HDMI-CEC) → Off / On

To use the Anynet+ Function, Anynet+ (HDMI-CEC)must be set to On.

N When the Anynet+ (HDMI-CEC)function is disabled, all the Anynet+ related operations are deactivated.

■Auto Turn Off → No / Yes

Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.

N The active source on the TV remote must be set to TV to use the Anynet+ function.

N If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

■Searching Connections

TV	Input
Source List	: TV	
Edit Name		
Anynet+(HDMI-CEC)		
Media Play (USB)
UMove	EEnter	RReturn

TV	P9
View TV
Select Device		
Record		
Menu on Device		
Device Operation		
Receiver :Off		
Setup		
UMove	EEnter
RReturn

Setup

Anynet+ (HDMI-CEC)		: Off
Auto Turn Off		: Off
Searching Connections
UMove	EEnter	RReturn

¦Switching between Anynet+ Devices

1.Press the TOOLS button.

Then press the ENTEREbutton to select Anynet+(HDMICEC).

2.Press the ▲ or ▼ button to select Select Device, then press the ENTEREbutton.

3.Press the ▲ or ▼ button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.

4.If you cannot find a device you want, press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.

5.Press the ▲ or ▼ button to select Searching Connections, then press the ENTEREbutton. The message Configuring Anynet+ connection is displayed.

When searching devices completes, the connected devices are listed in the Anynet+ menu.

NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. N The time required to scan for devices is determined by the number of connected devices.

N When the device scan is complete, the number of devices found are not displayed.

N Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to search devices.

N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Anynet+ mode changes to TV broadcast mode.
Select Device	Shows the Anynet+ device list.
Menu on Device	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
	menu of the DVD recorder will appear.
Device Operation	Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
	the play menu of the DVD recorder will appear.
Record	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
Receiver	Sound is played through the receiver.

English - 28