7Setup and Reset
4If an HDMI cable is connected, press [ 
] to move to HDMI and press [
]. The input source will change to HDMI mode.
HUB |
|
|
|
Auto Wireless Detection |
| Off |
|
Wireless Connection |
| Disconnected |
|
USB Connection |
| Disconnected |
|
Analog |
| Disconnected |
|
HDMI |
| Connected |
|
USB Super Charging |
| 2II |
|
Wireless ID |
| ||
|
|
| |
Return | Move | Enter | |
7.1.6USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
z
z
z
Data transmission is not available if USB Super Charging is on.
To enable standard charging or data transmission, set USB Super Charging to off. The input source does not need to be changed.
Configuring USB Super Charging
1Press [m ] on the product.
2Press [
] to move to SETUP&RESET, and press [ 
] on the product.
3Press [
] to move to HUB, and press [ 
] on the product.
4Press [
] to move to USB Super Charging, and press [
] on the product. The following screen will appear.
HUB |
|
|
|
Auto Wireless Detection |
| Off |
|
Wireless Connection |
| Disconnected |
|
USB Connection |
| Disconnected |
|
Analog |
| Disconnected |
|
HDMI |
| Disconnected |
|
USB Super Charging |
| Off |
|
Wireless ID |
| 1 Port |
|
|
| 2 Ports |
|
|
|
| |
Return | Move | Enter | |
z
z
Off: Disable USB Super Charging.
1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Quick battery charging is available only through one USB 3.0 port (it is found on the left side and is the port closest to you when facing the front of the monitor).
z2 Ports: Enable two USB 3.0 ports for quick battery charging.
5Press [
] to move to the option you want, and press [
] .
6The selected option will be applied.
7 Setup and Reset 70
