When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below.

JOG Button

Power saving/Non-signal mode

 

 

UP

Source Change

 

 

Down

 

 

 

PRESS(ENTER) for 2 seconds

Power Off

 

 

When the monitor displays the Main menu the JOG Button could be used as below.

JOG Button

Action

 

 

UP/DOWN

Move the option

 

 

 

Exit the Main menu.

LEFT

Close Sublist without saving value.

 

Value decreases in the slider.

 

 

RIGHT

Move to next depth.

Value increases in the slider.

 

 

 

PRESS(ENTER)

Move to next depth.

Save the value and close Sublist.

 

 

 

Changing Brightness, Contrast and Sharpness settings

You can adjust Brightness, Contrast or Sharpness by moving the JOG button UP/DOWN/LEFT/RIGHT, if no OSD menu is displayed.

Sharpness

 

Brightness

100

 

Contrast

 

 

 

 

 

 

――The displayed image may differ depending on the model.

Brightness

――This menu is not available when

 

Bright is set to Dynamic Contrast mode.

 

――This menu is not available when Eco Saving Plus is enabled.

――This menu is not available when Eye Saver Mode is enabled.

Contrast

 

 

――This menu is not available when

 

Bright is in Cinema or Dynamic Contrast mode.

 

――This menu is not available when Game Mode is enabled.

Sharpness

――This menu is not available when Bright is in Cinema or Dynamic Contrast mode.

――This menu is not available when Upscale is in Mode1 or Mode2 mode. ――This menu is not available when Game Mode is enabled.

13