Installation

Attaching the Stand

――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.

: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.

1

2

3

4

Place the stand neck on the monitor as shown in

Connect the cables.

Cover the COVER-REAR SUB.

Lift the stand neck.

the figure. Align the hollow circle on the stand neck

 

 

 

with the solid circle on the monitor, and then rotate

 

 

 

the stand neck clockwise until the solid circle on

 

 

 

the stand neck is aligned with that on the monitor.

 

 

 

5

Insert the stand base into the stand neck in the direction as shown in the figure.

-Caution

Do not press down on the monitor. There is a risk of damaging the monitor.

16