Removing the Stand
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1 | 2 | 3 | 4 |
|
|
|
Remove the stand base from the stand neck. | Lift the stand neck. | Disassemble and remove the | Disconnect the cables. |
5 | 6 |
Push a thin stick into the stand eject hole and | Lift and remove the stand. |
rotate the stand neck counterclockwise, as shown |
|
in the figure. |
|
-Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
17