Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel.
――This option is not available when Bright is in Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled.
――This menu is not available when Eye Saver Mode is enabled.
•• Off: Deactivate the Eco Saving Plus function.
•• Auto: The power consumption will automatically be reduced by about 10% over the current setting. (The reduction of power consumption depends on the customer screen brightness condition.)
•• Low: The power consumption will be reduced by 25% over the default setting.
•• High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Off Timer: Turn on Off Timer mode.Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
――This option is only available when Off Timer is set to On.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to System and set Off Timer to Off.
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
――Supplied for the wide models only such as 16:9 or16:10.
――If the monitor is in HDMI/DisplayPort mode and the screen says Check Signal Cable or power saving mode
activates, press the JOG button to display the
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
――If the monitor is in HDMI/DisplayPort mode and the screen says Check Signal Cable or power saving mode
activates, press the JOG button to display the
Source Detection
Select either Auto or Manual as the method to recognize input signal.
30