BN68-00751C-00Eng 7/20/04 5:20 PM Page 18
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1 Press the MENU 
button.
Result: The main menu is displayed.
2Press the 
or 
button to select Channel.
Result: The options available in the Channel group are displayed.
3 | Press the ENTER | button. |
|
|
|
4 | Press the or | button to select Manual Store. |
| Press the ENTER | button. |
Result: The options available in the Manual Store menu are displayed with Prog.No selected.
5Press the ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the 
or 
button and then press the ENTER
button.
You can also set programme number by pressing number buttons on the remote control.
6 | Press the or | button to select Colour System and then press |
| the ENTER | button. |
Select the Colour System required by pressing the 
or 
button repeatedly and then press the ENTER
button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43
7 | Press the or | button to select Sound System and then press |
| the ENTER | button. |
Select the sound standard required by pressing the | or | button | |
repeatedly and then press the ENTER | button. |
|
|
Result: The sound standards are displayed in the following order:
BG - DK - I - L
8For all the channels to move to the required channel numbers, repeat steps 5 to 7 after selecting Prog.No by pressing 
or 
button.
