Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1Press the MENU
button.
Result: The main menu is displayed.
2 Press the 
or 
button to select Channel.
Result: The options available in the Channel group are displayed.
3Press the ENTER
button.
4 Press the 
or 
button to select Auto Store. Press the ENTER
button.
Result: The Auto Store menu is displayed with the Start selected.
5 Press the ENTER
button to search the channels. The sub menu is changed from Start to Stop with channel search started.
Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last).
The programme originally selected is then displayed. To return to the previous menu, press the MENU
button.
To stop the search before it has finished,
press the ENTER
button with Stop selected.
6When searching and storing are complete, the Sort menu is displayed.
To sort the stored channels into the desired numerical order, go to step 7 of the “Sorting the Stored Channels” procedure on page 20.
To exit from the channel store function without sorting the channels, press the MENU(
) button repeatedly until the menus disappear.
7When the channels have been stored, you can:
Sort them in the order required (refer to page 20)
Assign names to the stored channels (refer to page 21)
Add or delete the channels (refer to page 19)
Fine tune channel reception if necessary (refer to page 22) 
Activate/deactivate the LNA (Low Noise Amplifier) feature (See page 23)
