English-20
If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu.
Press the or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Internal Mute”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER
button.
4. Press the EXIT button to exit.
When “Internal Mute” is set to “On’, the Sound menus except for
“Sound Select” (in PIP mode) cannot be adjusted.
Selecting the Internal Mute
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust
the volume every time the channel is changed.
This feature allows you to automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by raising the sound output
when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Auto Volume”, then press the ENTER button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER
button.
4. Press the EXIT button to exit.
Adjusting the Volume AutomaticallyListening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu.
Press the or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Sound Select”, then press the ENTER button.
3. Press the or button to select “Sub”.
Press the ENTER button.
4. Press the EXIT button to exit.
You can select this option when the “PIP” is set to “On”.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
BN68-01007P-00Eng.indd 20BN68-01007P-00Eng.indd 20 2006-08-12  8:11:522006-08-12  8:11:52