English-25
You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2”, "DTV" are
activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”, “HDMI1” , “HDMI2”,
are activated only when they are connected to your set.
3. Select the required device by pressing the or button.
Press the ENTER button.
Selecting the Source
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the
TV/DTV
button, number buttons(0~9), and the
P/ button on the remote control. But it cannot be selected using the SOURCE button.
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the or button to select “Edit Name”, then press the ENTER button.
3. Press the or button to select the device that you wish to edit.
Press the ENTER button.
4. Press the or button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
Editing the Input Source Names
BN68-01007P-00Eng.indd 25BN68-01007P-00Eng.indd 25 2006-08-12  8:11:582006-08-12  8:11:58