Samsung LE32M7, LE40M7 Selecting the CI (Common Interface) Menu, Resetting, Viewing Common Interface

English-45
This enables the user to select from the CAM-provided menu.
1. Press the D.MENU button to display the DTV menu.
2. Press the  or  button to select "System", then press the ENTER button.
3. Press the  or  button to select "Common Interface",
then press the ENTER button.
4.
Select to "CI Menu" by pressing the  or  button, and press the ENTER button.
5. Select the required option by pressing the  or  button,
and press the ENTER button.
6. Press the EXIT button to exit.
Select the CI Menu based on the menu PC Card.
Selecting the CI (Common Interface) Menu
You can reset the values stored to the factory default values.
The Reset operation deletes all channel information and user preferences returning
all values to their default factory state.
1. Press the D.MENU button to display the DTV menu.
2. Press the  or  button to select "System", then press the ENTER button.
3. Press the  or  button to select "Reset", then press the ENTER button.
4. The "Enter PIN" screen will appear.
5. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
The warning message is displayed.All values will be reset by pressing the
coloured buttons (red, green, yellow, and blue)in turn.
6. Press the EXIT button to exit.
Resetting
Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it.
1. Press the D.MENU button to display the DTV menu.
2. Press the  or  button to select "System", then press the ENTER button.
3. Press the  or  button to select "Common Interface",
then press the ENTER button.
4. Press the ENTER button to display the information for your application.
5. Press the EXIT button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. I nsert the CI CARD into the CAM in the direction of the arrow until it fits.
3. I nsert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
BN68-01007P-00Eng.indd 45BN68-01007P-00Eng.indd 45 2006-08-12  8:13:072006-08-12  8:13:07