Samsung TC242W Thin Client Monitor TC242W 4.Availability of NTW Standby mode and/or Power Management

3.2 Test parameters

parameters		Actual	Limit		parameters	Actual	Limit
Ambient temperature ( )		-			Test voltage (V)	-	-
Test frequency (Hz)	℃	-			Total harmonic distortion	-	-
					(%)
Crest factor		-		-		-	-

3.3 Description of how the appliance mode was selected or programmed N/A

3.4 Sequence of events to reach the mode where the equipment automatically change modes ( It is necessary to write the taken time to reach to the mode )

N/A

3.5 Any notes regarding the operation of the equipment

N/A

3.6 Instrumentation

Test instruments which were used in the test are as follows;

	Test instrumentation	Model name	Manufacturer	Serial or Firmware	Calibration
				(No./Ver.)	Date
-
-
-

3.7Measurement method used N/A

3.8Set-up and circuit for electrical testing ( Insert the picture or diagram of the test configuration ) N/A

4.Availability of NTW Standby mode and/or Power Management

4.1Characteristics of equipment relevant for assessing conformation

Test date	N/A	Time ( hour )	Actual
		(to reach automatically standby or off mode)	N/A

4.2Characteristics of equipment relevant for assessing conformation N/A

4.3Technical justification