Power Control
Auto Power On | Off |
PC module power |
|
Max. Power Saving | On |
|
|
Standby Control | Auto |
PowerButton | Power on only |
Network Standby | Off |
––The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•• AutoThe message No Signal will appear if no source device is connected.
•• Off
The message No Signal will appear if no input signals are detected.
――The Standby Control option is only enabled when Source is set to PC, DVI, HDMI or DisplayPort. ――If No Signal is displayed although a source device is connected, check the cable connection.
――If No Signal Message is set to Off, the No Signal message does not appear. If this is the case, set No Signal Message to On.
•• On
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•• Power on only: Set the power button to turn on the power.
•• Power on and off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
•• Off / On
112