Speaker Settings

MENU mSound Speaker Settings ENTER E

Sound

Sound Mode

Standard

HDMI Sound

AV(HDMI)

Sound Effect

 

 

 

Speaker Settings

 

Reset Sound

 

–– The displayed image may differ depending on the model.

Speaker Select

If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver. If this occurs, set the product to External.

•• External / Internal / Receiver

――When you set Speaker Select to External, the products speakers are turned off.

You will hear sound through the external speakers only. When the Speaker Select is set to Internal, both the product speakers and the external speakers are on. You will hear sound through both.

――If there is no video signal, both the products speakers and the external speakers will be mute.

Auto Volume

The volume can vary depending on the channel.

Automatically equalise the volume level when switching to another channel.

•• Off / Normal / Night

Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.

Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low.

――To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the connected source device may not be applied if Auto Volume is set to Normal or Night.

――If Speaker Select is set to External, Auto Volume is disabled.

69