Eco Solution
MENU m→ System → Eco Solution → ENTER EEco Solution
Energy Saving | Off |
Eco Sensor | Off |
No Signal Power Off | 15 min |
Auto Power Off | Off |
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•• Off / Low / Medium / High
Eco Sensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
――If the screen contrast is not sufficient, set the Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with energy standards.
Min. Backlight
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•• Off / 15 min / 30 min / 60 min――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel within 4 hours to prevent overheating.
•• Off / On
84