Samsung 460DRN Auto Adjustment, Signal Balance, Signal Control, Off, Fine, Note, Coarse, Position, 1.R-Gain, 2.G-Gain, 3.B-Gain, 4.R-Offset, 5.G-Offset, Signal Balance

Adjusting the LCD Display

Auto Adjustment

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

(Available in PC mode only)

Note

The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.

(Available in PC mode only)

(Not available in Dynamic Contrast mode of On.)

Signal Balance

Selects either On or Off with the signal control.

Signal Control

1.R-Gain

2.G-Gain

3.B-Gain

4.R-Offset

5.G-Offset