Adjusting the LCD Display
This is deactivated when a TV tuner box is installed.
5.MagicInfo
T.
6.TV
This is activated when a TV tuner box is installed.
7.BNC
BNC mode is not supported if the component cable is connected. To use BNC mode, remove the component cable and connect the BNC cable.
8.Component
Component mode is not supported if the BNC cable is connected. To use Component mode, remove the BNC cable and connect the Component cable.
Note
•The direct button on the remote control is the 'SOURCE' button.
•For PC and DVI, this is deactivated if the cable is disconnected.
Edit NameMENU → ENTER → [Input] → → ENTER → [Edit Name] → , → ENTER
Name the input device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC
Picture [PC / BNC / DVI / MagicInfo Mode]Available Modes
• PC / BNC / DVI