Heat Controller 7602-443 user manual Menu Navigation Shortcuts, Operating Mode Selection, Auto

Heat Controller, Inc. 7602-443 COMMUNICATING, PROGRAMMABLE THERMOSTAT User Manual

The 7602-443 Communicating, Programmable Thermostat is the perfect compliment to your geothermal heat pump system and represents a significant advancement in thermostat communicating technology. For homeowners, the 7602-443 provides highly customizable climate control features designed to maximize comfort and reduce the amount of energy consumed by your geothermal heat pump system. Please read the following instructions carefully to maximize the comfort and cost-saving potential of your geothermal heat pump system.

Menu Navigation Shortcuts

1.From any other screen than the home screen, hold down the left arrow button ( ) to return to the home screen.

2.From the home screen, hold the left arrow button ( ) to go to the System Status screen.

1.0 Operating Mode Selection

To set the Operating Mode of your thermostat, navigate to the MODE user option on the Home Screen using the left/right arrow buttons and press the center button. The Operating Mode Menu shows the possible Operating Modes with the currently active Operating Mode highlighted. Use the up/ down arrow buttons to select the desired Mode for use and press the center button to save your selection. The following Modes are available:

•Off (default): No equipment operation

•Auto: Thermostat automatically controls the equipment to run either heating or cooling depending on the setpoints.

•Cool: Thermostat controls cooling equipment depending on Cooling setpoint

•Heat: Thermostat controls heating equipment depending on Heating setpoint

•Emergency Heat: Thermostat controls auxiliary heat. No compressor operation.

SYSTEM STATUS

LT1 TEMP		38.1
LT2 TEMP		79.9
COMP DISCHARGE		157.7
HOT WATER EWT		121.5
LEAVING AIR		75.1
LEAVING WATER		73.3
ENTERING WATER		78.5
ECM BLOWER RPM		550
ECM TARGET CFM		800
ECM BLWR STATIC		0.5
PUMP WATTS		140
FLOW RATE GPM		7.4
PUMP SPEED		60%
PREVIOUS
10/13/11	8:27 AM
	FAN AUTO
RH 41%	HUMID ON
69°	AUTO
	SETPOINT
	HEAT 62
	COOL 82

RH TEMP MODE FAN MENU OPERATING MODE MENU

OFF

AUTO

COOL

HEAT

EMERGENCY HEAT

CHANGE MODE

PREVIOUS SAVE

3