Adjusting the LCD Display
Note
•Not available when Dynamic Contrast is set to On.
•If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp. function is disabled.
Color Temp. 
Color Temp. is a measure of the 'warmth' of the image colors.
Note
•Not available when Dynamic Contrast is set to On.
•This function is only enabled if the Color Tone is set to Off.
Size 
The Size can be switched.
1.16:9 - Sets the picture to 16:9 wide mode.
2.Zoom 1 - Magnifies the size of the picture on the screen.
3.Zoom 2 - Magnifies the size of the picture more than “Zoom 1”.
4.4:3 - Sets the picture to 4:3 normal mode.
5.Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input.
Note
•Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature.
•ZOOM1, ZOOM2 will be unavailabel in HDMI mode.
•The Position and Reset functions are available when ZOOM1 or ZOOM2 is run.
•Not available when Dynamic Contrast is set to On.