Connections

1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display .

3.Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control.

4.Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting a DVD Player

1.Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the LCD Display and the PR, Y, PB jacks on the DVD player.

2.Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the LCD Dis- play and the AUDIO OUT jacks on the DVD player.

Note

•Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control.

•Then, start the DVD Player with a DVD disc inserted.

•A component cable is optional.

For an explanation of Component video, consult your DVD manual.

Connecting a DTV Set Top Box

Note

•The connections for a typical Set Top Box are shown below.