Reverse Side | Port | Description |
| HDMI IN | Connects to a source device using an HDMI cable. |
| SERVICE (5V 0.5A) | This port is used to upgrade the software. |
| EXTERNAL IR / AMBIENT SENSOR IN | Supplies power to the External ambient sensor board or receives the light |
|
| sensor signal. |
|
| External ambient sensor: Sold separately |
DVI IN
| RGB IN | Connects to a source device using a |
| DVI IN | Connects to a source device using a DVI cable or |
| AUDIO OUT | Connects to the audio of a source device. |
| RGB / DVI / HDMI / AV / COMPONENT | Connect to audio input using an audio cable. |
PIM | AUDIO IN |
|
|
|
RGB / DVI /
HDMI /AV /
COMPONENT
AUDIO IN
RS232C IN | Connects to MDC using an |
|
|
RS232C OUT |
|
|
|
PIM | Connects to a PIM. (Refer to the PIM user manual for details.) |
COMPONENT / AV IN | Connects to a source device using the Component/AV cable. |
|
|
16