LG Electronics 32PC5DVC Vcr Setup, When connecting with an antenna, How to connect, How to use

VCR SETUP

■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.

When connecting with an antenna

EXTERNAL

VIDEO	L	R S-VIDEO	ANT OUT
		OUTPUT	ANT IN
		SWITCH

Wall Jack

2

1

RS-232C IN

(CONTROL & SERVICE)

ANTENNA/CABLE

IN

HDMI/DVI

IN

RGB IN (PC)

AUDIO IN (RGB/DVI)

EQUIPMENT SETUP

Antenna

1. How to connect

1Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set.

2Connect the antenna cable to the RF antenna in socket of the VCR.

2.How to use

■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

19