APPENDIX
APPENDIX
24. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
25. Channel Add/Del (Command: m b)
To add and delete the channels. |
| |
|
| |
Transmission [m][b][ ][Set ID][ | ][Data][Cr] | |
Data 00: Channel Delete | Data 01: Channel Add | |
|
| |
Acknowledgement [b][ ][Set ID][ | ][OK/NG][Data][x] | |
26.Key (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
Code | Remote control | Code | Remote control |
(Hexa) |
| (Hexa) |
|
0F | TV | 39 | CC |
0B | INPUT | 40 | D |
08 | POWER | 41 | E |
0E | TIMER | 07 | F |
Number Key | 06 | G | |
4C | - (Dash) | 44 | ENTER |
CB | ADJUST | 43 | MENU |
09 | MUTE | 52 | SOUND |
02 | VOL + | 4D | PICTURE |
03 | VOL - | 5B | EXIT |
00 | CH + | 0A | SAP |
01 | CH - | 1A | BACK |
1E | FAV |
|
|
27. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor number.
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should
be mapped to, and the Minor is the
Data 00: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
Data 01 & 02: Major Channel Number
Data 01: High byte | Data 02: Low byte |
Two bytes are available for the Major and Minor, nor- mally only the second byte is used.
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
72
