APPENDIX
APPENDIX
01. Power (Command: k a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off | Data 01: Power On |
|
|
Acknowledgement [a][ | ][Set ID][ ][OK/NG][Data][x] |
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
*Note: In this model, TV will send the Acknowledge after power on processing completion.
*There might be a time delay between command and acknowledge.
02. Input Select (Command: k b)
To select input source for the TV.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV | Data 04: Component |
Data 01: Analog TV | Data 07: |
Data 02: AV | Data 08: HDMI |
|
|
Acknowledgement [b][ | ][Set ID][ ][OK/NG][Data][x] |
|
|
* If you select input source, we recommend “command x b”.
03. Input Select (Command: x b)
To select input source for TV.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) | Data 01: DTV (Cable) |
Data 10: Analog (Antenna) | Data 11: Analog (Cable) |
Data 20: AV | Data 40: Component |
Data 60: | Data 90: HDMI |
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
04. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ | ][Set ID][ ][Data][Cr] |
Data 01: 4:3 | 04: Zoom |
02: 16:9 | 06: Set by program |
Reserved
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
05. Screen Mute (Command: k d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen mute off (Picture on) Data 01: Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
06. Volume Mute (Command: k e) To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
07. Volume Control (Command: k f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. G p.71.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
08. Contrast (Command: k g) To adjust screen contrast.
You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. G p.71.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
09. Brightness (Command: k h) To adjust screen brightness.
You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. G p.71.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
10. Color (Command: k i) To adjust screen color.
You can also adjust color in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. G p.71.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
11. Tint (Command: k j) To adjust screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ G p.71.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
12. Sharpness (Command: k k) To adjust screen sharpness.
You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. G p.71.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
70
