Samsung LN-S2341W manual Operation, Turning the TV On and Off, Plug and Play Feature

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the front of the panel.

Plug and Play Feature

When the TV is initially powered on, several basic settings proceed automatically and subsequently.

The following settings are available.

1.Press the POWER button on the remote control. The message “Plug & Play” is displayed.

2. Select the appropriate language by pressing the		or	button.
Press the ENTER	button to confirm your choice.

3.The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

4. Press the or button to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER button.

5.Press the ENTER button to select “Start”.

The channel search will start and end automatically.

After all the available channels are stored, the “Clock Set” menu appears.

Press the ENTER button at any time to interrupt the memorization process.

6.Press the ENTER button.

Press the	or	button to move to the “Hour”, “Minute” or “am/pm”.
Set the “Hour”, “Minute” or “am/pm” by pressing the			or	button.

7.Press the ENTER button to confirm your setting. The message “Enjoy your watching.” is displayed.

•Language: Select your language.

•Air/Cable: Select your local cable company TV system.

•Auto Program: Selects between terrestrial antenna connection or your local cable company TV system. The TV automatically cycles through all of the available channels and stores them

in memory. This takes about one to two minutes.

•Clock Set: Sets the current time for the TV clock.

You can also set the hour and minute by pressing the number buttons on the remote control.

If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER	button.

2. Press the ENTER button to select “Plug & Play”.

3. This will change or reset the settings.

English-11