Setting up the TV with your PC

How to Auto Adjust

Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.

The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

This function does not work in DVI-Digital mode.

Preset: Press the SOURCE button to select PC mode.

1. Press the MENU button to display the menu.			TV			Picture
Press the ▲ or ▼ button to select “Picture”, then press the ENTER	button.			Mode		: Standard	►
				Backlight			7
				Contrast			95
				Brightness			45
				Sharpness			50
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER		button.		Auto Adjustment
		button.		Screen			►
Press the EXIT button to exit.				▼ More
Press the EXIT button to exit.				Move		Enter	Return
				Move		Enter	Return
Easy Setting				Tools
Easy Setting			Anynet+(HDMI-CEC)
1. Press the TOOLS button on the remote control.			Picture Mode	:	Standard
1. Press the TOOLS button on the remote control.			Sound Mode	:	Custom
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER		button.	Sleep Timer		Off
		button.	Auto Adjustment
			Auto Adjustment
			Move	Enter		Exit

Auto Adjustment in progress.

Please wait.

Adjusting the Screen Quality

The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen.

Preset: Press the SOURCE button to select PC mode.