Using the Energy Saving Feature

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the ENTER button.

2.Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER button.

Select the required option (“Off”, “Low”, “Medium”, “High”, “Auto”) by pressing the ▲ or ▼ button.

Press the ENTER button.

Off: Turns off the energy saving function.

Low: Sets the TV to low energy saving mode.

Medium: Sets the TV to medium energy saving mode.

High: Sets the TV to high energy saving mode.

Auto: Automatically adjusts the brightness of the TV screen in accordance

with the scenes.

Press the EXIT button to exit.

TV

Setup

 

More

 

 

Energy Saving

: Off

SW Upgrade

 

Move

Enter

Return

TV

Setup

 

More

Energy Saving

:

Off

 

 

SW Upgrade

 

Low

 

 

 

 

Medium

 

 

 

 

High

 

 

 

 

Auto

 

 

Move

 

Enter

Return

Move

 

Enter

Return

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG

(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.

1.Insert a USB drive containing the firmware upgrade into the SERVICE port on the rear of the TV.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

3.Press the ▲ or ▼ button to select “SW upgrade”, then press the ENTER button.

4.Press the ENTER button.

The message “Scanning for USB... It may take up to 30 seconds.” is displayed.

5.The message “Upgrade version XXXX to version XXXX The system would be reset after upgrade.” is displayed.

Press the ◄ or ► to select the “Yes”, then press the ENTER button.

TV Rear Panel

USB Drive

TV

Setup

 

More

 

 

Energy Saving

: Off

SW Upgrade

 

Move

Enter

Return

USB Software Upgrade

Scanning for USB...

It may take up to 30 seconds

Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

USB Software Upgrade

Upgrade version XXXX to version XXXX The system would be reset after upgrade.

Yes

 

No

English - 54

Page 56
Image 56
Samsung LN32A540P2D Using the Energy Saving Feature, Upgrading the Software, With the scenes Press the Exit button to exit